MICRO-LUBRICANTS.

For micro-lubricant applicators.

 

Industry-leading micro-lubricants that cut metals better, last longer, improve product quality, lower production cost and keep your production environment moving forward.

 

  1. Home
  2.  » FLUID360 Solutions—Micro Lubricants

Metal Cutting

Protect production and product quality with advanced coolants, metal forming fluids, straight cutting oils, and tapping and drilling fluids that meet the most stringent environmental requirements.

Metal Cleaning

Optimizing cleaning and degreasing of parts, machine tools, equipment and facilities with innovative and proven water-based, solvent-based, biodegradable and synthetic cleaners and degreasers.

Metal Protection

Preserve metal product value by protecting from the inevitable effects of corrosion. Go beyond ordinary metal protecting solutions and deliver superior products and customer experiences.

Maintenance Solutions

Services that keep your fluids, equipment, tooling and facilities performing at their best. From simple fluid testing and management through to equipment maintenance and rehabilitation.

360° OF METALWORKING PRODUCTION ADVANTAGE

Protect production and product quality with advanced coolants, metal forming fluids, straight cutting oils, and tapping and drilling fluids that meet the most stringent environmental requirements.

Get beyond commodity cutting solutions and move your production and business forward.

 

ONE-STOP SHOP FOR ALL METALWORKING FLUIDS

Ashburn cutting solutions include soluble oils, semi-synthetic and synthetic coolants as well as straight cutting oils, grinding oils, micro-lubricants, tapping and drilling fluids, metal forming fluids, layout inks, and removers.

Micro-Lubricants

Ashburn’s Mike-O-Lube cutting fluids are designed for use with micro-lubricant applicators. These non-misting applicators dispense individual droplets of fluid directly to the cutting tool. Mike-O-Lube cutting fluids are a clean and economical alternative to misting and flooding in applications such as drilling, tapping and sawing.

Ashburn Metalworking Fluids

Mike-O-Lube 100

Mike-O-Lube 100 is a heavy-duty fluid fortified with extreme pressure additives for difficult machining and stamping of ferrous and nonferrous materials. This product provides excellent lubricity and boundary film lubrication. Mike-O-Lube 100 significantly increases tool and die life and greatly reduces wear. Mike-O-Lube 100 does not contain nitrates, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant.
Part Numbers: E-0100-01, E-0100-05, E-0100-55

 

Ashburn Metalworking Fluids

Mike-O-Lube 110

Mike-O-Lube 110 is a heavy-duty fluid fortified with non-chlorinated extreme pressure additives. Use for difficult machining and stamping of ferrous and nonferrous materials including aluminum and titanium. This product provides excellent lubricity and boundary film lubrication. Mike-O-Lube 110 significantly increases tool and die life and greatly reduces wear. Mike-O-Lube 110 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant.
Part Numbers: E-0110-01, E-0110-05

Ashburn Metalworking Fluids

Mike-O-Lube 200

MIKE-O-LUBE 200 is a medium to heavy-duty fluid fortified for machining and stamping ferrous and nonferrous materials. This product provides excellent lubricity and boundary film lubrication. The product is very effective in high speed operations on thin gauge strips of steel, copper and brass. Does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant.

Ashburn Metalworking Fluids

Mike-O-Lube 300

Mike-O-Lube 300 is a medium-duty fluid for machining ferrous and nonferrous materials. The product is very effective in general metal cutting operations and also for use in woodworking applications. Mike-O-Lube 300 does not contain nitrates, chlorine, sulfur, phenols, n Excellent Lubricity molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. 
Part Numbers: E-0300-01, E-0300-05, E-0300-55

 

Ashburn Metalworking Fluids

Mike-O-Lube 400

Mike-O-Lube 400 is a synthetic water-based fluid for general purpose machining of ferrous and nonferrous materials. The product provides excellent cooling properties with good lubricity. Mike-O-Lube 400 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. 
Part Numbers: E-0400-01, E-0400-05, E-0400-55

 

 

Ashburn Metalworking Fluids

Mike-O-Lube 500

Mike-O-Lube 500 is a heavy-duty fluid fortified with extreme pressure additives for use on difficult machining of nonferrous materials including aluminum and titanium. Mike-O-Lube 500 significantly increases tool and die life and greatly reduces wear. Use for high speed cutting, tapping, drilling, reaming, and sawing on nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using. Mike-O-Lube 500 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant.
Part Numbers: E-0500-01, E-0500-05, E-0500-55

Ashburn Metalworking Fluids

Mike-O-Lube 600

Mike-O-Lube 600 is a medium-duty fluid for machining nonferrous materials. This product provides excellent lubrication. Mike-O-Lube 600 increases tool life and reduces wear. Use for medium-duty milling, drilling, tapping, sawing and punching of nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using. Mike-O-Lube 600 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. 
Part Numbers: E-0600-01, E-0600-05

 

Ashburn Metalworking Fluids

Mike-O-Lube 610

Mike-O-Lube 610 is a heavy-duty fluid fortified with extreme pressure additives for use on difficult machining of nonferrous materials including aluminum and titanium. This product provides excellent lubrication. Mike-O-Lube 610 significantly increases tool and die life and greatly reduces cost. Works well on aluminum. Use for high speed cutting, tapping, drilling, reaming, sawing, drawing and stamping on nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using. Mike-O-Lube 610 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. 
Part Numbers: E-0610-01, E-0610-05

Ashburn Metalworking Fluids

Mike-O-Lube 680

Mike-O-Lube 680 is a sawing and cutting lubricant for use on aluminum. This product provides excellent lubrication. Mike-O-Lube 680 will increase sawblade and tool life and reduce wear. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using. Mike-O-Lube 680 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.
Part Numbers: E-0680-01, E-0680-05

>>> Schedule an Online Evaluation

Ashburn Chemical Technologies offers a safe and effective evaluation of your micro-lubricant fluid requirements and make recommendations on how to improve performance. Why not sign up now? It’s free, with no obligation.

Let's Connect!

Please tell us how to best get ahold of you and your area of interest. We'll have someone reach out very soon. Thank you.

Company Contacts

Ashburn Chemical Technologies wants to make sure you get the information you need and your questions answered. Please fill out the contact form, email us, or give us a call on the number below.

7403 Wright Road, Houston, Texas USA 77041

+1 (832) 399-1000

+1 (832) 399-1010

Communications@ashburnchemical.com